• No.2, First Floor,8th
    Street,Nandanam Extension,
    Chennai - 600035
  • No.1073,15th Cross,
    30th Main, Banashankari
    2nd Stage, Bengaluru
  • Monday - Saturday
    9:30am - 6:30pm
    Sunday CLOSED

SPD for Telecom Application

  • Home
  • .
  • SPD for Telecom Application

All the equipment connected to telephone lines (10 pair-Krone MDS) due to the fact that they are very sensitive and have very low surge withstand capability.Many installations include data transmission equipment such as modems, telecom switches, etc. We offer a wide range of protectors for telephone and internet lines, including protectors in different formats: DIN rail, Aerial, Krone and 19” rack.

Protected equipment : EPABX, Modems, Computers, Routers, Telecom Switches

Power Lines Devices LPP-C6/P48

Protects sensitive computer networks like router, hubs, switches, PC workstations using 1000 base T against lightning induced surges, AC Power Interference and ground loop energies.

Features

  • All mode protection
  • Multi-stage design offers exceptional safety
  • Fail safe design
  • Easy installation & maintenance
  • PoE-Power over Ethernet
  • Imax of 20 kA available

General Specifications


Maximum Working Voltage Uc 58 V
Voltage Protection Level Up (10/700 µs at 5kV) 79 V
Maximum Discharge Current Imax 100 A
Maximum operating Current IL 300 mA
SPD Class Class III
Protection modes Common & transverse
Response time, tA < 5 nS
Lines protected All pairs (1/2, 3/6, 4/5, 7/8)
Shunt Capacitance 5 pF
Standard compliance IEC 61643-21
Connector type RJ 45
Maximum Data Rate 1000 Mb/s
Earth connection Flying Lead
Case Material Anodized Aluminium
Power Lines Devices TLP-PSTN/L2

All the equipment connected to any type of telephone lines must be protected due to the fact that they are very sensitive with very low surge withstand capacity. Operating voltage of this kind of lines do not normally exceed 100 volts. Many installations include data transmission equipment such as modems, telecom switches, etc. We offer a wide range of protector for telephone and internet lines, including protectors in different formats : DIN rail, Aerial , Krone and 19” rack.



Features


  • Single port or multi-port protection
  • Versatile telecom lines protection
  • All mode protection
  • Multi-stage protection offers exceptional safety
  • High surge rating & bandwidth
  • Simple plug-in installation

General Specifications


Maximum Working Voltage Uc 190 V
Voltage Protection Level Up (At 5 kV 10/700µS) 220 V
Maximum Discharge Current Imax 20 KA (8/20 µS)
Maximum Operating Current IL 150 mA
SPD Class Class II
Protection modes Common & transverse
Response time, tA < 5 nS
Shunt Capacitance < 160 pF
Insertion loss < 0.3dB (@ 144 KHz)
Standard Compliance IEC 61643-21
Connector type RJ 45 (2 Wire)
Maximum Data Rate 6 Mb/s
Earth connection Flying Lead
Case Material Anodized Aluminium


Power Lines Devices KRONE LSA PLUS-KLP10-V130

KLP series protectors are designed to protect telephone lines terminated in KRONE MDF frame which provides 10 Pair Protection in a compact module. Protection is provided for L-L, L-E with Fail-safe design.



Features



  • 10 pair protection in one compact magazine
  • Quick and easy plug-in installation
  • All mode protection (L-L, L-E)
  • High Surge rating
  • With Fail safe design

General Specifications


Maximum Working Voltage U 170 V
Maximum Discharge Current Imax 20 kA (8/20 µS)
SPD Class Class II
Protection modes Common and transverse
Protection stages Single stage
Transverse Time (1kv/us) < 200 nS
DC spark-over voltage 230 V+20%
Capacitance < 1.5 pF
Insulation Resistance >10 GΩ at 100 V DC
Standard Compliance IEC 61643-21
ITU (CCITT) 1 X K17
Earth Connection Via earth clips on two ends
Case Material Thermal Plastic (UL 94 V-0)
Contact Pin Material Bronze with silver plating


The enclosure must have connection to Earth.



KDP10-V130

KDP series protectors are designed to protect telephone lines terminated in KRONE MDF frame which provides 10 Pair Protection in a compact module. Protection is provided for L-L, L-E with Fail-safe current fuse design.



Features



  • 10 pair protection in a compact module
  • Multi-stage protection offers additional safety
  • Full range of voltage to suit any particular applications
  • Quck and easy plug-in option
  • All mode protection (L-L, L-E)
  • High Surge rating and wide bandwidth
  • Fail Safe current fuse design

General Specifications


Maximum Working Voltage Uc 180 V
Voltage Protection Level Up(10/700 µs at 5 kV ) 210 V
Maximum Discharge Current Imax 20 kA (8/20 µS)
SPD Class Class II
Protection modes Common and transverse
Protection Stages 3 Stages
Response Time < 5 nS
Capacitance 50 pF
Standards Compliance IEC 61643-21
ITU (CCITT) 1 X K17
Earth Connection Via earth clips on two ends
Case Material Thermal Plastic (UL 94 V-0)


The enclosure must have connection to Earth.Polarity of Installation is important.