HOW TO ASSESS LIGHTNING RISK QUICKLY?
Lightning is the most natural phenomenon occurring in nature. All of us encounter lightning very often. Especially if the location is more prone to thunderstorm, lightning is quite obvious! And we all know that lightning can cause severe damages to human lives, historical monuments, industrial buildings/structures and what not!! There is a high possibility that the electrical/electronic equipment inside these buildings/structures might also be at risk. The only way to find that out is, to do a RISK ASSESSMENT for your building/structure!
If you want to manually calculate your risk for any particular building/structure, then you have to follow all the steps and formulae given in IS/IEC 62305-2. This particular part exclusively talks about performing lightning risk assessment for any application of your choice. Be it your house, office, mall, industry etc.
To perform all the calculations manually and to arrive at the risk level might be a tedious task. You will need an expert to perform the task. You will have to invest both your time and money for the same. To make this task incredibly easy for you, we, at JEF, has come up with a software to perform your RISK ASSESSMENT! This is an automated software which is built based on the formulae given in IS/IEC 62305-2. The MOST EXCITING thing about our software is you can perform the entire risk assessment and even generate the "Bill of Materials" & "Report" within 5 minutes!!
The essential benefit of our software is that it performs both internal and external lightning risk assessments parallelly and continuously executes risk assessments from level 4 to level 1, providing the best techno-commercial solution. The software even avoids the human error that may occur when you are calculating the risk manually. Level 4 is the minimum level of protection and level 1 being the highest level of safety. The cost increases almost four times from level 4 to level 1.
We call this software JEF SHIELD. The working premise of JEF SHIELD is that it identifies the risk, analyses it, and then determines your RISK LEVEL. And it can be found on www.jeftechno.com!
All you have to do is give ACCURATE input data as and when it asks. Your risk assessment results are solely dependent on your INPUT DATA. More the accuracy of your input data, more the accuracy of your risk level!
Input Data includes around 20-25 crucial parameters which mainly includes:
- Location in which the building/structure is present
- Length, Width & Height of the building/structure
- Details of power & telecom lines
- Type of floor, number of floors in the building/structure
- Risk of fire
- Total number of people in the building/structure & functional hours etc.
Once the input data is given, our JEF SHIELD performs the risk assessment in the back-end. You can generate the risk assessment report and bill of materials within 2 minutes and download the same for your reference.
ISN'T THAT SO COOL? BOTH YOUR TIME AND MONEY IS SAVED BIG TIME!
Sitting in any corner of the world, you can perform risk assessment for any structure/building and have the results within minutes!! So, next time you have any requirement to perform lightning risk assessment for any kind of buildings/structures, REMEMBER OUR JEF SHIELD!
Please let us know if you need further assistance or have any requirements: [email protected]
