OUR BUSINESSProducts
Audit Services
Consulting Services
AUDIT SERVICESEarthing Health Assessment
Instrumentation Earthing System
Lightning Protection Audit
Power Quality Studies
Electrical & Fire Safety
CONSULTING SERVICESOUR BUSINESSAUDIT SERVICESCONSULTING SERVICES
Power System Study is the engineering process JEF Techno uses to protect structures, equipment and personnel, delivered in compliance with IS/IEC 62305.
Power System Study reduces the risk of equipment damage, downtime, fire and injury caused by lightning strikes, earth faults or transient overvoltages in industrial and commercial facilities.
In India, power system study follows IS/IEC 62305 and IS 3043; internationally JEF Techno also aligns with NFPA 780, IEEE 80 and IEC 62561 depending on the project location.
Cost depends on facility size, soil/site conditions and scope; JEF Techno provides a free site assessment and itemized quote before starting power system study.
A typical power system study project takes 2-6 weeks from site survey to commissioning, depending on facility size and site access.
Factories, warehouses, data centers, substations, telecom towers, solar plants, commercial buildings and any facility handling critical or high-value equipment.
JEF Techno recommends annual inspection of load flow and short circuit study, with a full re-assessment every 3-5 years or after any major structural change.
Yes — power system study is commonly retrofitted; JEF Techno's team conducts a site survey to adapt the design to existing structural and access constraints.
Power System Study focuses on consulting service delivering load flow, short-circuit, protection coordination and arc-flash hazard studies using etap/digsilent for industrial and utility power networks, while load flow and short circuit study addresses a related but distinct engineering requirement — our consultants advise which (or both) your facility needs.
Yes, JEF Techno delivers power system study across the Middle East (UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain) and Southeast Asia (Singapore, Malaysia) in addition to India.
A compliance report, test certificates, as-built drawings and a maintenance schedule are provided on completion.
Many jurisdictions require power system study for industrial, high-occupancy or hazardous-area buildings under local fire/electrical codes — JEF Techno can confirm the exact requirement for your facility's location.
Industry-standard tools such as ETAP, CDEGS/XGSLab and proprietary risk-assessment calculators aligned to IS/IEC 62305 are used for simulation and design.
Manufacturing, oil & gas, data centers, warehousing/logistics (including clients such as Amazon), EPC/construction (L&T), agrochemicals (Syngenta), renewable energy and utilities.
JEF Techno typically quotes per site/facility based on scope, with fixed-fee options available for multi-site or annual maintenance contracts.
Power System Study is the engineering process JEF Techno uses to protect structures, equipment and personnel, delivered in compliance with IS/IEC 62305.
Power System Study reduces the risk of equipment damage, downtime, fire and injury caused by lightning strikes, earth faults or transient overvoltages in industrial and commercial facilities.
In India, power system study follows IS/IEC 62305 and IS 3043; internationally JEF Techno also aligns with NFPA 780, IEEE 80 and IEC 62561 depending on the project location.
Cost depends on facility size, soil/site conditions and scope; JEF Techno provides a free site assessment and itemized quote before starting power system study.
A typical power system study project takes 2-6 weeks from site survey to commissioning, depending on facility size and site access.
Factories, warehouses, data centers, substations, telecom towers, solar plants, commercial buildings and any facility handling critical or high-value equipment.
JEF Techno recommends annual inspection of load flow and short circuit study, with a full re-assessment every 3-5 years or after any major structural change.
Yes — power system study is commonly retrofitted; JEF Techno's team conducts a site survey to adapt the design to existing structural and access constraints.
Power System Study focuses on consulting service delivering load flow, short-circuit, protection coordination and arc-flash hazard studies using etap/digsilent for industrial and utility power networks, while load flow and short circuit study addresses a related but distinct engineering requirement — our consultants advise which (or both) your facility needs.
Yes, JEF Techno delivers power system study across the Middle East (UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain) and Southeast Asia (Singapore, Malaysia) in addition to India.
A compliance report, test certificates, as-built drawings and a maintenance schedule are provided on completion.
Many jurisdictions require power system study for industrial, high-occupancy or hazardous-area buildings under local fire/electrical codes — JEF Techno can confirm the exact requirement for your facility's location.
Industry-standard tools such as ETAP, CDEGS/XGSLab and proprietary risk-assessment calculators aligned to IS/IEC 62305 are used for simulation and design.
Manufacturing, oil & gas, data centers, warehousing/logistics (including clients such as Amazon), EPC/construction (L&T), agrochemicals (Syngenta), renewable energy and utilities.
JEF Techno typically quotes per site/facility based on scope, with fixed-fee options available for multi-site or annual maintenance contracts.
When you visit any website, it may store or retrieve information on your browser, mostly in the form of cookies. This information might be about you, your preferences or your device and is mostly used to make the site work as you expect it to.
Because we respect your right to privacy, you can choose not to allow some types of cookies. Click on the different category headings to find out more and change our default settings. However, blocking some types of cookies may impact your experience of the site.
More information